| Tribology and Physics | p. 1 |
| Adhesion of nanoparticles within spray-dried agglomerates | p. 3 |
| Adherence of natural rubber sheets subjected to biaxial tensile strain | p. 9 |
| Effect of compounding on the adhesion of rubber to medium carbon steel | p. 14 |
| The effect of surface topography on the adhesion of poly(urethane)-metal contacts | p. 20 |
| Friction of surgeons' gloves | p. 28 |
| The friction and wear of diamond sliding on diamond | p. 33 |
| An energy dispersive x-ray and imaging x-ray photoelectron spectroscopical study of transfer film chemistry and its influence on friction coefficient | p. 38 |
| Micromechanical modelling of load-dependent friction in contacts of elastic spheres | p. 44 |
| Microdistortion of polymer surfaces by friction | p. 53 |
| On the nature of the transfer film at the interface of a water-lubricated sliding polymer-metal couple | p. 57 |
| The effect of substrate surface roughness on the friction and wear of sputtered MoS[subscript 2] films | p. 65 |
| Evaluation of very thin lubricant films | p. 71 |
| Boundary lubrication of rubber by aqueous surfactant | p. 76 |
| Abrasive wear in lubricated contacts | p. 81 |
| Fluid-film lubrication in the internal combustion engine: an invited review | p. 91 |
| An elastohydrodynamic analysis of a misaligned sterntube bearing | p. 101 |
| Mathematical analysis of the performance of tilting-pad journal bearing under static load | p. 108 |
| Microelastohydrodynamic lubrication of low-elastic-modulus solids on rigid substrates | p. 116 |
| The behaviour of greases in elastohydrodynamic contacts | p. 124 |
| The squeeze-film lubrication of ellipsoids | p. 133 |
| Developments in fluorinated liquid lubricants and lubricant additives | p. 141 |
| Effect of extreme-pressure additives on fatigue life of rolling bearings | p. 147 |
| Mechanism of oil and lubricant action under transient conditions of bearing operation | p. 154 |
| The generation of wear surfaces | p. 158 |
| Frictional temperature field and its relationship to the transition of wear mechanisms of steel 52100 | p. 165 |
| Computer simulation of the effect of pre-oxidation in erosion-corrosion environments | p. 170 |
| Updating the fracture theory of wear | p. 177 |
| The formation of glass in the wear of reaction-bonded silicon nitride | p. 182 |
| The influence of temperature on the friction and wear of thin ceramic coatings in carbon dioxide | p. 189 |
| Selection of wear-resistant materials for the petrochemical industry | p. 195 |
| The role of water in the wear of ceramics | p. 205 |
| Ductile-brittle transitions and wear maps for the erosion and abrasion of brittle materials | p. 212 |
| A model for the erosive wear of rubber at oblique impact angles | p. 222 |
| The application of confocal scanning microscopy to the examination of ceramic wear surfaces | p. 230 |
| Residual stress and surface roughness in fretting fatigue | p. 236 |
| Metrological characterization of polymeric bearings at the nanometre level | p. 240 |
| The classification of rough surface contacts in relation to tribology | p. 249 |
| The effect of crystal orientation on the indentation cracking and hardness of MgO single crystals | p. 257 |
| Mechanical wear models for metallic surfaces in sliding contact | p. 266 |
| Contact mechanics: needs for broader applications | p. 273 |
| Relocatable 3D surface mapping quantifies asperity polishing and limiting oil-film thickness | p. 279 |
| Surface engineering...an enigma of choices | p. 285 |
| Wear resistance and structure of (Ti, Al)N coatings | p. 292 |
| Surface engineering: its current and future impact on tribology | p. 297 |
| Simulation of the tribological behaviour of tools for cutting ductile materials | p. 307 |
| A transient elastohydrodynamic lubrication analysis of a cam and follower | p. 313 |
| Factors affecting the durability of repeatedly stressed flexible magnetic recording media | p. 321 |
| The effect of head-cleaning agents on the wear mechanisms of video heads | p. 328 |
| Developments in lubrication - the thinning film | p. 334 |
| Table of Contents provided by Blackwell. All Rights Reserved. |
