Preface.
Acknowledgments.
1 Introduction.
1.1 Evolution of Gas Chromatographic Columns.
1.2 Central Role Played by the Column.
1.3 Justification for Column Selection and Care.
1.4 Literature on Gas Chromatographic Columns.
1.5 Gas Chromatographic Resources on the Internet.
References.
2 Packed Column Gas Chromatography.
2.1 Introduction.
2.2 Solid Supports and Adsorbents.
Supports for Gas?Liquid Chromatography.
Adsorbents for Gas?Solid Chromatography.
2.3 Stationary Phases.
Requirements of a Stationary Phase.
USP Designation of Stationary Phases.
Kovats Retention Index.
McReynolds and Rohrschneider Classifications of Stationary
Phases.
Evaluation of Column Operation.
Optimization of Packed Column Separations.
2.4 Column Preparation.
Coating Methods.
Tubing Materials and Dimensions.
Glass Wool Plugs and Column Fittings.
Filling the Column.
Conditioning the Column and Column Care.
2.5 United States Pharmacopeia and National
Formulary Chromatographic Methods.
References.
3 Capillary Column Gas Chromatography.
3.1 Introduction.
Significance and Impact of Capillary Gas Chromatography.
Chronology of Achievements in Capillary Gas Chromatography.
Comparison of Packed and Capillary Columns.
3.2 Capillary Column Technology.
Capillary Column Materials.
Fused Silica and Other Glasses.
Extrusion of a Fused-Silica Capillary Column.
Aluminum-Clad Fused-Silica Capillary Columns.
Fused-Silica-Lined Stainless Steel Capillary Columns.
3.3 Preparation of Fused-Silica Capillary Columns.
Silanol Deactivation Procedures.
Static Coating of Capillary Columns.
Capillary Cages.
Test Mixtures for Monitoring Column Performance.
Diagnostic Role Played by Components of Test Mixtures.
3.4 Chromatographic Performance of Capillary Columns.
Golay Equation Versus the van Deemter Expression.
Choice of Carrier Gas.
Measurement of Linear Velocity and Flow Rate.
Effect of Carrier Gas Viscosity on Linear Velocity.
Phase Ratio.
Coating Efficiency.
3.5 Stationary-Phase Selection for Capillary Gas
Chromatography.
Requirements.
History.
Comparison of Columns from Manufacturers.
Polysiloxane Phases.
Polyethylene Glycol Phases.
Cross-Linked Versus Chemically Bonded Phase.
Chemical Bonding.
MS-Grade Phases Versus Polysilarylene or Polysilphenylene
Phases.
Sol-Gel Stationary Phases.
Phenylpolycarborane?Siloxane Phases.
3.6 Specialty Columns.
EPA Methods.
Chiral Stationary Phases.
Gas?Solid Adsorption Capillary Columns: PLOT Columns.
3.7 Capillary Column Selection.
Practical Considerations of Column Diameter, Film Thickness, and
Column Length.
Capillary Columns of 0.53mm i.d.: Megabore Columns.
Correlation of Column Dimensions and Film Thickness with
Parameters in the Fundamental Resolution Equation.
Column Selection for Gas Chromatography by Specifications.
3.8 Column Installation and Care.
Carrier Gas Purifiers.
Ferrule Materials and Fittings.
Column Installation.
Column Conditioning.
Column Bleed.
Retention Gap and Guard Columns.
Column Fatigue and Regeneration.
3.9 Special Gas Chromatographic Techniques.
Simulated Distillation.
Multidimensional Gas Chromatography.
Computer Modeling of Stationary Phases.
References.
4 Column Oven Temperature Control.
4.1 Thermal Performance Variables and Electronic
Considerations.
4.2 Advantages of Temperature Programming over Isothermal
Operation.
4.3 Oven Temperature Profiles for Programmed-Temperature Gas
Chromatography.
4.4 Role of Computer Assistance in Optimizing Separations in Gas
Chromatography.
DryLab (LC Resources).
ProezGC (Restek Corporation).
GC-SOS (Chem SW).
4.5 Fast or High-Speed Gas Chromatography.
Selectivity Tuning.
Resistively Heated Columns and Column Jackets.
4.6 Subambient Oven Temperature Control.
References.
Selected References.
Appendix A: Guide to Selection of Packed Columns.
Appendix B: Column Selection.
Index.
