In-situ Studies with Photons, Neutrons and Electrons Scattering

In-situ study of phase transformation in steel during welding.- In-Situ Studies of Phase Transformation and Residual Stresses in LTT Alloys during Welding Using Synchrotron Radiation.- In situ Scanning Electron Microscopy High Temperature Deformation Experiments to Study Ductility Dip Cracking of Ni-Cr-Fe Alloys.- Grain nucleation and growth of individual austenite and ferrite grains studied by 3DXRD microscopy at the ESRF.- Direct analysis of solidification-mode during welding for the assessment of hot-cracking.- In-situ synchrotron study of inclusions in the weld pool for the assessment of nucleation potency of acicular ferrite.- Characterization of solid state phase transformation in continuously heated and cooled ferritic weld metal.- In-Situ Determination of Phase Transformations and Structural Changes during Non-equilibrium Material Processing.- In-situ phase transformation studies on a transformation induced plasticity (TRIP) steel under simulated weld thermal cycles using synchrotron diffraction.- Imaging fast processes in liquid metal foams and semi-solid alloys using synchrotron radioscopy with spatio-temporal micro-resolution.- In situ Measurements for Structural Integrity: An Engineer???s Perspective.- In situ Neutron Diffraction during Thermo-mechanically Controlled Process for Low Alloy Steels.- Influence of plastic deformation on the residual stress distribution and fatigue behaviour of high strength steels welds.