| Symposium Organization | |
| Preface | |
| Research and Development of Polymers in Concrete in China | p. 3 |
| Research Trends of Concrete-Polymer Composites in Korea | p. 13 |
| Recent Progress in Polymer Mortar and Concrete in Japan | p. 21 |
| Continuous Production of Polymer Concrete - a New Generation of Machines | p. 33 |
| Application of Epoxy Emulsion Cement Mortar in China | p. 43 |
| The Challenge of Polymer Concrete for Formative Art: Application of Polymer Concrete to Archisculpture and Advanced Material Sculpture | p. 49 |
| Characterization of Polymer-Filler Interaction in MMA Polymer Concrete | p. 57 |
| Effect of Filler on the Mechanical Properties of Unsaturated Polyester Resin Mortar | p. 67 |
| An Empirical Approach for Predicting Compressive Strength of Lightweight Polyester Mortars by the Maturity Method | p. 75 |
| Effects of Mix Proportioning Factors on Consistency of Lightweight Polyester Mortars | p. 85 |
| Engineering Properties of Permeable Polymer Concrete Using Stone Dust and Heavy Calcium Carbonate | p. 95 |
| On the Size Effect in Flexural Strength of Resin Concrete | p. 105 |
| Mechanical Properties of Traditional Ceramics-Filled Polymer Concrete | p. 111 |
| Development of Porous Polymer Cement Concrete for Highway Pavements in Belgium | p. 121 |
| Properties of High Polymer Cement Mortar | p. 131 |
| Characteristics of Polymer-Modified Mortars using Redispersible Polymer Powders | p. 141 |
| Influences of Process Conditions on Strength Properties of Polymer-Modified Mortars using an Unsaturated Polyester Resin | p. 151 |
| Studies of a New Non-Dispersive Concrete for use Underwater and its Applications | p. 161 |
| Crack Repair by Resin Injection: Materials, Equipment and Methods | p. 169 |
| Hydrophilic Polyurethane Grouts and their Application on Roller-Compacted Concrete Dams | p. 179 |
| Effects of r-PET and PG on the Mechanical Properties of Polymer Concrete made from Recycled PET-Based Unsaturated Polyester Resin | p. 191 |
| Tensile Characteristics of Polymer-Modified Asphalt Concretes | p. 201 |
| GPC Characterization of Polymer-Modified Asphalt Binders | p. 209 |
| Physical and Mechanical Properties of Polymer Concrete Using Coal Mine Waste | p. 217 |
| Building Materials Production based on Sulfur Ore from the Kuril Islands | p. 229 |
| Super-Workable Slag Alkaline Polymer Concretes | p. 235 |
| The Study and Application of Polymer Concrete Gutter Grates and Manhole Covers | p. 245 |
| Study on Centrifugal Reinforced Polymer Concrete Pipe | p. 253 |
| Properties of Polymer-Impregnated Silica Fume Mortar for Precision Surface Plate | p. 263 |
| Evaluation of Adhesion between Fresh Polymer Mortars and Fresh Cement Concrete | p. 273 |
| Development of a Low-Temperature Storehouse using Sandwich Panels with Polymer Mortar Facings | p. 283 |
| Development of Polymer Mortar Ondol Panel | p. 291 |
| Reinforcement of a Load-Bearing Wall using Epoxy Resin Mortar | p. 303 |
| The Thermal Influence on the Bond of Polymer-Modified Concrete Overlays | p. 315 |
| Shrinkage Stresses in Polymer Concrete Overlays | p. 323 |
| Estimation of the Creep Coefficient of Resin Concrete at High Temperature | p. 333 |
| Thermal Stresses of Polymer Mortar Composite Hollow Cylinders Strengthened by Steel Plate | p. 343 |
| Stresses and Strains of Resin Mortar during Setting | p. 353 |
| Compressive Strength and Adhesion Strength of PCC under Sustained Load at Elevated Temperature | p. 363 |
| Thermal Resistance of Polymer-Modified Mortars using Redispersible Polymer Powders | p. 371 |
| Evaluation of Chloride Permeability of Surface Coating Materials by Rapid Chloride Permeability Test | p. 381 |
| Quantitative Evaluation of Suppressive Effects of Polymeric Surface Coating Materials on Carbonation of Concrete | p. 391 |
| Effects of Moisture Content and Pore Structure of Substrate Concrete on Adhesive Strength of Epoxy Coating | p. 401 |
| Frost Resistance of Polypropylene Fiber Reinforced Light-Weight Polymer Modified Mortar | p. 409 |
| Performance of Concrete-Polymer Composites in the Hot Climates of Iran | p. 419 |
| Weatherability of Polymer-Modified Mortars after Ten-Year Outdoor Exposure in Koriyama and Sapporo | p. 427 |
| Durability of High Flexural Strength Alumina Cement-Phenol Resin Composite | p. 437 |
| Hydrophobic Impregnant for Damaged Concrete Structure | p. 447 |
| Influence of Physical Properties of Water Barrier Penetrants on Permeability into Mortar | p. 457 |
| The Fatigue Behavior of R/C Beam Repaired with Concrete-Polymer Composites | p. 463 |
| Strengthening of Timber Structures using Polymer Concrete | p. 471 |
| Mechanical Properties of Polymer Concrete and Fiber-Reinforced Polymer Concrete | p. 483 |
| Behaviour of Concrete Beams with Externally Bonded Polymer-Impregnated Highly Reinforced Ferrocement Plates | p. 493 |
| Influence of Polymer Species and Additives on High-Strength Polymer-Cement Composite | p. 503 |
| Water Resistance of Polymethyl Methacrylate Mortars | p. 511 |
| Development of MDF Cementitious Composites based on Packing Theory | p. 521 |
| Factors Affecting Flexural Strength of MDF Cements | p. 529 |
| Keyword Index | p. 537 |
| Table of Contents provided by Blackwell. All Rights Reserved. |
