Tubular String Characterization in High Temperature High Pressure Oil and Gas Wells

About the book series Editorial board of the book seriesPreface AcronymsSymbols About the authors 1 Background 1.1 Placing the test string 1.2 Seating condition 1.3 Perforation condition 1.4 Injection condition 1.5 Production condition 1.6 Shut-in condition 1.7 Re-opened condition 2 Element theory 2.1 Differential geometry 2.1.1 Frenet frame 2.1.2 Geometric description of the 3D curved borehole 2.1.3 Geometry description of tubular string in 3D inclined well-bore 2.2 Variational methods 3 Tubular string buckling theoretical analysis 3.1 Introduction 3.2 Deformation differential equations modelling 3.2.1 Tubular string differential element force analysis 3.2.2 Static force equilibrium equation for the tubular string infinitesimal 3.2.3 The buckling differential equation for the tubular string 3.3 The equivalent variational problem 3.3.1 Tubular displacement analysis 3.3.2 External force and deformation energy analysis 3.3.3 The equivalent variational problem 3.4 Simplified analysis of the model 3.4.1 The buckling critical load and tubular string deformation solution 3.4.2 The axial buckling deformation analysis of the downhole string 4 Mechanical analysis for the placement of the test string 4.1 Mechanical analysis 4.2 Temperature distribution 4.3 Pressure distribution 4.4 Model calculation 4.4.1 The internal and external pressure calculation 4.4.2 The axial force distribution, the normal pressure and the moment calculation 4.4.3 Calculation procedures 4.5 Example calculation 4.5.1 Simulation parameters 4.5.2 Main results 5 Setting the mechanical analysis 5.1 Hydraulic packer force analysis in deviated HPHT wells 5.1.1 Model building 5.1.2 Computing parameters 5.1.3 Algorithm 5.1.4 Numerical simulation 5.1.5 Discussion 6 Re-opened mechanical analysis 6.1 Introduction 6.2 APDTU-VTPF 6.2.1 HTHP wells characteristics 6.2.2 The packer principle 6.2.3 Theoretical model 6.2.4 Solution methodology 6.2.5 Analysis of field case 7 Predicting pressure and temperature in HTHP injection wells 7.1 Introduction 7.2 PDPT-IW 7.2.1 Physical model 7.2.2 Mathematical model 7.2.3 Solution to the model7.2.4 Solving model 7.2.5 Numerical simulation 7.2.6 Sensitivity analysis 7.3 PDPT-SIBUHT 7.3.1 Mathematical model 7.3.2 Solution of the model 7.3.3 Solution model 7.3.4 Numerical simulation 7.4 PTPTF-IWLFM 7.4.1 Model building 7.4.2 Model solution 7.4.3 Examples calculation 7.5 PTPD-IGWTE 7.5.1 Mathematical model of heat transmission in the well-bore 7.5.2 Pressure in the well-bore mathematical model 17.5.3 Model solution 7.5.4 Numerical simulation 7.6 DFA-SIPVF 7.6.1 The model dryness fraction in the varied (T, P) fields 7.6.2 Varied (T, P) fields analysis 7.6.3 Algorithm steps 7.6.4 Simulation and discussion 7.6.5 Sensitivity analysis 7.7 AASDT-SITP 7.7.1 Force analysis on the tubular string 7.7.2 The tubular axial load and axial stress 7.7.3 Analysis of axial deformation 7.7.4 Varied (T, P) fields analysis 7.7.5 Numerical implementation 7.7.6 Numerical simulation 7.7.7 Main results and analysis 7.8 NMSQ-DWV 7.8.1 Basic assumptions 7.8.2 The steam quality model with variable (T, P) fields 7.8.3 The analysis of the variable (T, P) fields 7.8.4 Numerical implementation 7.8.5 Simulation and discussion 7.8.6 Trend analysis 7.8.7 Sensitivity analysis 7.8.8 Conclusion 8 Predicting of pressure and temperature in HTHP production wells 8.1 Introduction 8.2 PTP-GW 8.2.1 Physical model 8.2.2 Coupled differential equations system model 8.2.3 Model solution8.2.4 Solving the model 8.2.5 Numerical simulation 8.2.6 Sensitivity analysis 8.3 PTPTV-GW 8.3.1 The coupled system differential equations model 8.3.2 Solution of the model 8.3.3 Solving the model 8.3.4 Numerical simulation 8.3.5 Results and analysis 8.3.6 Error analysis 8.4 PDTPVD-GLTPTF 8.4.1 Prediction model 8.4.2 Model solution 8.4.3 Calculation of some parameters 8.4.4 Example calculation 8.5 NMSOGW-TTBF 8.5.1 The coupled system model 8.5.2 Model analysis 8.5.3 Numerical solution 8.5.4 Calculation of some parameters 8.5.5 Initial condition and boundary condition 8.5.6 Example calculation 8.6 PDPTVD-TBF 8.6.1 The coupled system model 8.6.2 Model analysis 8.6.3 Numerical solution 8.6.4 Numerical simulation 8.6.5 Sensitivity analysis 8.7 PPTHVD-STF 8.7.1 The coupled system model 8.7.2 Model analysis 8.7.3 Numerical solution 8.7.4 Numerical simulation and results discussion 8.7.5 Sensitivity analysis 8.7.6 Comparison analysis 9 Predicting the pressure and temperature in shut-in 9.1 Introduction 9.2 PPT-SPDW 9.2.1 Physical model 9.2.2 The coupled system model 9.2.3 Solution model 9.2.4 Numerical simulation 9.3 PPTVD-TFSP 9.3.1 The coupled system model 9.3.2 Model solution 9.3.3 Numerical simulation 10 Software design and development 10.1 Calculation program 10.1.1 All conditions calculation 10.1.2 Calculation according to conditions 10.2 The database References Appendix Subject index Book series page